Mitsubishi Electric 840 Series Manuale di Installazione Scaricare il pdf

This manual confers no industrial property rights or any rights of any other kind,

nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be

held responsible for any problems involving industrial property rights which may

occur as a result of using the contents noted in this manual.

Warranty

Mitsubishi will not be held liable for damage caused by factors found not to be

the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the

Mitsubishi products; damage, secondary damage, accident compensation

caused by special factors unpredictable by Mitsubishi; damages to products

other than Mitsubishi products; and to other duties.

For safe use

This product has been manufactured as a general-purpose part for general

industries, and has not been designed or manufactured to be incorporated in

a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric

power, aerospace, medicine or passenger movement vehicles, consult with

Mitsubishi Electric.

This product has been manufactured under strict quality control. However

when installing the product where major accidents or losses could occur if the

product fails, install appropriate backup or failsafe functions in the system.



HEAD OFFICE

HIMEJI WORKS

: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN

: 840, CHIYODA MACHI, HIMEJI, JAPAN

Side

JAPANESE

ENGLISH

JY997D51601B

Side

Safety Precaution

(Read these precautions before use.)

This manual classifies the safety precautions into two categories:

and .

Depending on the circumstances, procedures indicated by may

also cause severe injury.

It is important to follow all precautions for personal safety.

Associated Manuals

How to obtain manuals

For product manuals or documents, consult with the Mitsubishi Electric dealer

from who you purchased your product.

Applicable standards

FX3S-5DM comply with the EC Directive (EMC Directive). Further information can

be found in the following manual.

FX

3S Series User's Manual - Hardware Edition

Attention

 This product is designed for use in industrial applications.

Note

 Manufactured by: Mitsubishi Electric Corporation

2-7-3 Marunouchi, Chiyoda-ku, Tokyo, 100-8310 Japan

 Manufactured at: Mitsubishi Electric Corporation Himeji Works

840 Chiyoda-machi, Himeji, Hyogo, 670-8677 Japan

 Authorized Representative in the European Community:

Mitsubishi Electric Europe B.V.

Gothaer Str. 8, 40880 Ratingen, Germany

Indicates that incorrect handling may cause hazardous

conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous

conditions, resulting in medium or slight personal injury

or physical damage.

Manual name Manual No. Description

3S Series

User’s Manual

- Hardware Edition

JY997D48601

MODEL CODE:

09R535

Explains the FX3S Series PLC

specifications for I/O, wiring,

installation, and maintenance.

1. Outline

The FX3S-5DM display module (hereinafter called display module) is installed to the

3S Series main unit or expansion board to monitor/change device states and values.

1.1 Incorporated Items

1.2 External Dimensions and Part Names

2. Installation

The following section describes the installation method for the FX3S Series PLC

(FX

3S-30M. In this example).

Turn off the power to the PLC before installation.

For more details on removal and installation, refer to the PLC main unit manual.

FX

3S Series User's Manual - Hardware Edition

Product FX3S-5DM display module

Included items Installation Manual (This manual)

No. Name Description

[1] "OK" button Use to choose the item, set the value, etc.

[2] "+" button Use to move cursor or set the value.

[3] "-" button Use to move cursor or set the value.

[4] "ESC" button Use to cancel operation or return to previous screen.

[5] Display Displays current time and monitored status of device.

[6]

Connector for

PLC

Used to connect display module to PLC.

[7]

Display module

fixing hook

Used to fix display module to PLC.

(When used together with an expansion board)

INSTALLATION

PRECAUTIONS

 Make sure to cut off all phases of the power supply externally before attempting

installation or wiring work.

Failure to do so may cause electric shock or damage to the product.

INSTALLATION

PRECAUTIONS

 Use the product within the generic environment specifications described in PLC

main unit manual (Hardware Edition).

Never use the product in areas with excessive dust, oily smoke, conductive dusts,

corrosive gas (salt air, Cl

2, H2S, SO2, or NO2), flammable gas, vibration or

impacts, or expose it high to temperature, condensation, or rain and wind.

If the product is used in such conditions, electric shock, fire, malfunctions,

deterioration or damage may occur.

 Do not touch the conductive parts of the product directly.

Doing so may cause device failures or malfunctions.

 Connect the display module securely to the appropriate connector.

Loose connections may cause malfunctions.

Unit: mm (inches)

MASS (Weight): Approx. 20 g (0.05 lbs)

Cut off this part when

using an expansion board

at the same time.

34.4 (1.36")

51.2 (2.02")

35 (1.38")

9.6 (0.38")

12 (0.48")

[5]

[6]

[7]

[4]

[3]

[2]

[1]

2.1 When Installing the Display Module Directly to the Main Unit

1) Remove the top cover (A in the figure

on the right).

2) Make sure the display module (B in the

figure on the right) is in parallel with the

main unit and attach it to the optional

equipment connector.

2.2 When Using the Display Module Together with an Expansion

Board

Assuming that the expansion board is attached to the main unit.

The connector cover for the expansion board is removed.

To attachment of the expansion board, refer to the following manual.

FX

3S Series User's Manual - Hardware Edition

1) Cut off part A shown in the right figure

(display module).

Caution:

When part A is cut off, the display

module can not be installed to the main

unit directly.

2) Make sure the display module is in

parallel with the main unit and attach it

to the optional equipment connector (B

in the figure on the right).

3. Specifications

3.1 Applicable PLC

 Only one display module can be used per main unit.

For details on the system configuration, refer to the following manual.

FX

3S Series User's Manual - Hardware Edition

3.2 General Specifications

The general specifications are equivalent to the PLC main unit.

For general specifications, refer to the following manuals.

FX

3S Series User's Manual - Hardware Edition

STARTUP AND

MAINTENANCE

PRECAUTIONS

 Do not disassemble or modify the PLC.

Doing so may cause fire, equipment failures, or malfunctions.

* For repair, contact your local Mitsubishi Electric representative.

 Do not drop the product or exert strong impact to it.

Doing so may cause damage.

DISPOSAL

PRECAUTIONS

 Please contact a certified electronic waste disposal company for the

environmentally safe recycling and disposal of your device.

TRANSPORTATOION AND

STORAGE PRECAUTIONS

 The product is a precision instrument. During transportation, avoid impacts larger

than those specified in the general specifications by using dedicated packaging

boxes and shock-absorbing palettes.

Failure to do so may cause failures in the product.

After transportation, verify operation of the product and check for damage of the

mounting part, etc.

Model name Applicability

3S Series PLC Ver. 1.20 or later

3.3 Display Specifications

4. Function List

The functions of a display module are listed as follows:

For details on the functions, refer to the following manuals.

FX

3S Series User's Manual - Hardware Edition

 Monitor/Test

 Clock display and setting

 Operation button ON/OFF information

 Display screen protect function

 Specified device monitor function

 Back light off function

 Error display valid/invalid

 Decimal/hexadecimal current value display setting

Item Specifications

Display device TN monochrome liquid crystal display

Display character Seven-segment display + icon display

Backlight Green LED backlight

Button 4 operation buttons (ESC, -, +, and OK)

FX3S-5DM

INSTALLATION MANUAL

This manual describes the part names, dimensions, mounting, and specifications

of the product. Before use, read this manual and the manuals of all relevant

products fully to acquire proficiency in handling and operating the product. Make

sure to learn all the product information, safety information, and precautions.

Store this manual in a safe place so that it can be taken out and read whenever

necessary. Always forward it to the end user.

Registration:

The company name and the product name to be described in this manual are the

registered trademarks or trademarks of each company.

Effective October 2014

Specifications are subject to change without notice.

2014 MITSUBISHI ELECTRIC CORPORATION

Manual Number JY997D51601

Revision B

Date October 2014

INSTALLATION MANUAL 1

Sommario

Pagina 1 - INSTALLATION MANUAL

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corpora

Commenti su questo manuale

Nessun commento

Mitsubishi Electric 840 Series Manuale di Installazione

Navigare online o scaricare Manuale di Installazione per Televisori e monitor Mitsubishi Electric 840 Series. Mitsubishi Electric 840 Series Installation manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Televisori e monitor Mitsubishi Electric 840 Series