Mitsubishi Electric XD520U-G Manuale Utente

1DLP ProjectorXD550U/XD560U/WD570U/XD360U-EST/WD380U-ESTControlling the projector using a personal computerThis projector can be controlled by connec

105. Execution procedure of RS-232C commands via LANWhen the RS-232C command is executed via LAN, a 32-byte connection certification data must be adde

22. Control command configurationThe command consists of the address code, function code, data code, ACK/NAK, and end code. The length of the com-mand

3[Example 1] Turning ON the power. (Values enclosed in quotation marks are ASCII codes.):[Example 2] Selecting VIDEO as the input signal during auto p

4[RS-232C control flowchart][Compatibility with the former models]To use the RS-232C commands designed for the former models of Mitsubishi projector,

54. Command list4.1 Operation commandsThe operation commands are used for the basic operation setting of this projector. They may not be executedwhile

6Use the following commands to obtain other information.The PC sends the command without attaching the data code to it. On the other hand, the projec

7[Example] When displaying the MENU selection bar. (Values enclosed in quotation marks are ASCII codes.):4.4 Direct commands (Not executable in stand-

8LAMP MODE LM 0 (STANDARD), 1 (LOW)STANDBY MODE STBY 53h 54h 42h 59h 0 (LAN), 1 (LOW),AUDIO INPUT AUDIOIMAGE REVERSE IR 49h 52h 0 (OFF), 1 (MIRROR), 2

94.7 Password lock commandsThe password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4 -dig