Mitsubishi Electric XD435U Manuale Utente Scaricare il pdf

1) Interface

Controlling the projector using a personal computer

This projector can be controlled by connecting a personal computer with RS-232C terminal.

PC-controllable functions :

•Turning the power ON or OFF

• Changing input signals

• Inputting commands by pressing the buttons on the control panel and remote control

• Menu setting

Connection

Important:

• Make sure that your computer and projector are turned off before connection.

• Boot up the computer first, and then plug the power cord of the projector.

(If you do not follow this instruction, the Comport may not function.)

• Adapters may be necessary depending on the PC connected to this projector. Contact your dealer for details.

PROTOCOL RS-232C

BAUD RATE 9600 [bps]

DATA LENGTH 8 [bits]

PARITY BIT NONE

STOP BIT 1 [bit]

FLOW CONTROL NONE

This projector uses RXD, TXD and GND lines for RS-232C control.

For RS-232C cable,the reverse type cable should be used.

2) Control command diagram

The command consists of the address code, function code, data code, and end code. The length of the command

varies among the functions.

Address code Function code Data code End code

HEX 30h 30h Function Data 0Dh

ASCII '0' '0' Function Data

[Address code] 30h 30h (In ASCII code, '0' '0') fixed.

[Function code] A code of each fixed control move.

[Data code] A code of each fixed control data (number) and not always indicated.

[End code] 0Dh (In ASCII code, ' ') fixed.

DLP

Projector

XD435U / XD430U / SD430U / XD420U / SD420U

1 2 3 4 5

Sommario

Pagina 1 - Projector

11) InterfaceControlling the projector using a personal computerThis projector can be controlled by connecting a personal computer with RS-232C termin

Pagina 2 - 3) Control sequence

23) Control sequence(1) Send the command from the personal computer to the projector.(2) The projector will send a return command after it receives an

Pagina 3 - 9) Password lock commands

3Sending commands Status code from Descriptionfrom the PC, etc. the projector30 30 72 35 34 0D Command operating the same'0' '0' &

Pagina 4 - ) Reading command diagram

4ASCII HEXFunctionData (Receive)FunctionData (Receive)POWER ON vP 1 76h 50h 31hPOWER OFF vP 0 76h 50h 30hINPUT COMPUTER 1 vI r1 76h 49h 72h 31hINPUT C

Pagina 5 - BCR/YPBPR), 2(AUTO)

5How to set the gradeUse the ASCII codes to set the grade for setting data. Please refer to the table below for the HEX code.ASCII '+' &apos

Commenti su questo manuale

Nessun commento

Mitsubishi Electric XD435U Manuale Utente

Navigare online o scaricare Manuale Utente per Proiettori dati Mitsubishi Electric XD435U. Mitsubishi Electric XD435U data projector Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Proiettori dati Mitsubishi Electric XD435U